How to extract DMT. METHOD : 1 , 2 ,3,4 and smoking tech.
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
-
- Level 2 (20-29)
- Posts: 24
- Joined: Sat Oct 11, 2008 5:37 pm
I finally tried it!!!!!
but there were no effects...
I smoked the oregano that was in the phalaris juice with a home made pipe i made (it was a good pipe, I inhaled a lot of smoke) and nothing happend, here is how i did it:
1)I lit a match, put it in the bowl, and after a second, after I saw the oregano is starting to burn I inhaled as much smoke as I could, held it for 10 seconds and exhaled.
2) After I did that i had some problems with the matches, it took me about 30 seconds and then i did step 1 three times in a row. still no effects, only really thick smoke, with taste of oregano.
I thought that maybe the problem is how I produced it.
here is how I produced:
1) I took 3 handfuls of phalaris auridencea
2) Put in the freezer for a few minutes (I thought that like that it will be easier to juice)
3) I took it out and broke it to little pieces.
4) I put it all of it to a big cup and started and used a milkshake blender (one that cuts) to make it into a big piece of choped phalaris.
5) I squeezed it over a bowl and alot of green juice came out
6) I added oregano and waited
7) Soon before all the water evaporated my dad came home so i put in a plastic bag.
Today I put it out again and let it dry in the sun.
9)After it was really dry I took and then smoked like I wrote before.
can you please tell me how it didn't worked?
Thanks in advance.
but there were no effects...
I smoked the oregano that was in the phalaris juice with a home made pipe i made (it was a good pipe, I inhaled a lot of smoke) and nothing happend, here is how i did it:
1)I lit a match, put it in the bowl, and after a second, after I saw the oregano is starting to burn I inhaled as much smoke as I could, held it for 10 seconds and exhaled.
2) After I did that i had some problems with the matches, it took me about 30 seconds and then i did step 1 three times in a row. still no effects, only really thick smoke, with taste of oregano.
I thought that maybe the problem is how I produced it.
here is how I produced:
1) I took 3 handfuls of phalaris auridencea
2) Put in the freezer for a few minutes (I thought that like that it will be easier to juice)
3) I took it out and broke it to little pieces.
4) I put it all of it to a big cup and started and used a milkshake blender (one that cuts) to make it into a big piece of choped phalaris.
5) I squeezed it over a bowl and alot of green juice came out
6) I added oregano and waited
7) Soon before all the water evaporated my dad came home so i put in a plastic bag.
Today I put it out again and let it dry in the sun.
9)After it was really dry I took and then smoked like I wrote before.
can you please tell me how it didn't worked?
Thanks in advance.
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
Okay I am going to suggest Putting it in of water. Was the phalaris juiced enough so that it was a liquid? Also I should add that you should smoke more of it. If its in the orageno its probabally spread out through all the orageno. Smoke all of it. If you did this put it in water. Is it spring where you are? Let it grow a bit.
-
- Level 2 (20-29)
- Posts: 24
- Joined: Sat Oct 11, 2008 5:37 pm
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am
-
- Level 4 (50-199)
- Posts: 193
- Joined: Wed May 14, 2008 2:07 am